XF-6F high pressure air compressor refrigerated compressed air dryer

 
Description:
 
Capacity:8m³/min
Power Supply:220V
Conn.:ZG1 1/2”
Dimensions LxWxH:900x560x1070
Weight(KG):210
Standard Working Conditions
Air inlet temperature     ≤80°C
Ambient Temperature   ≤40°C
Working Pressure       10 bar
Dew point :3-10°C      Refrigerant: R22
Capacity:8m³/min
Power Supply:220V
Conn.:ZG1 1/2”
Dimensions LxWxH:900x560x1070
Weight(KG):210
Standard Working Conditions
Air inlet temperature     ≤80°C
Ambient Temperature   ≤40°C
Working Pressure       10 bar
Dew point :3-10°C      Refrigerant: R22
5 Features
1. Constant dew point temperature
2. Stable performance for long time running
4. External type drain for easy maintenance
4. Low pressure drop for energy saving purpose
 
6. Flow chart
 
1, Heat exchanger    
2, Evaporator      
3, Gas/Liquid separator               
4, Jam-prevent drain filter    
5, Manual draining valve            
6, Refrigerated compressor    
7, Aspirating filter                         
 8,Vaporization       
 9, Separator                 
10, Gas/Liquid mixer    
11,Thermal expansion valve  
12, View monitor   
13, Dry filter    
14,Tank 
15, Hot gas by-pass valve         
16, Water adjustable valve 
17, WaterFilter     
18, Condenser(Air-cooling) 
19, Condenser(Water-cooling)     
 20, Pre-cooler(Water-cooling) 
21, Pre-cooler(Air-cooling)            
 22, Auto-drainer 
 
7 Option
1. Environmentally friendly refrigerant, such as R407C and R134A, R404A
2. Dew point indicator 
3. High pressure indication for small air dryer 
4. Pre filter and after filter installed 
5. Higher ambient temperature
6. PLC controller
 
8 Design characteristics 
Refrigerated & air system is accurate calculated by professional designing engineer, keep 20% capacity.
Pipeline is made from inner zincification. You can choose working pressure during 0.3~4.5Mpa.
Stainless steel pipeline, it's suitable for medicine, food stuff, acid-resistant, alkaline-resistant and erodent-resistant industry.
Ripple pipeline of both internal and external of the heat exchanger to increase the using rate of cooling air, adverse current structure, perfect returning temperature and it won't freeze.
Evaporator is made from laminose copper pipeline with aluminum flake, high efficiency of heat exchanging of the perfect structure.
Good drainage, it adopts 3 grades for draining, can drain lots of condensate water and oil contaminant so as to keep clean and dryness of the system and air, meanwhile reduce system load.
Multi-control of circuitry to supply to different users (single control; integrate circuit, linkage control, PC panel, frequency conversion, etc.)
Outer cooling fan with large volume, low noise, and long life if switch frequently.
Low condenser made from copper, slow flow, multi-cycling and high heat exchanging rate. It won't freezing and dirty if stop for a long time.
Armstrong foam burning resistant & adiabatic material. It's the least loss of cooling air.
Protection level of compressor is IP54 (dustproof and spill proof).
 
 
9 Specification 

 
 
air compressor   Refrigerated Air Dryer  Air dryer